 DETAILED PROGRAMME
Download the detailed programme in pdf
Monday, October 8th
| |
Session A |
Session B |
Session C |
Time |
Paper Title |
Paper Title |
Paper Title |
| 08.40-09.00 |
Conference
Opening Ceremony: Paks NPP - Changes and Challenges, J. Kovács, Director
General, Paks NPP, Hungary |
| |
Opening Plenary Session
The Current International Position on Major Inspection Concerns
Chairmen: G. Selby, M. Bieth, K. Miya |
| 09.00-09.20 |
Developments in the USA: Looking to the Future: G. Selby |
| 09.20-09.40 |
Recent Development of Condition Monitoring
Technique in Japanese Nuclear Industry ; K. Miya |
| 09.40-10.00 |
Some European Trends in NDE for the Nuclear
Industry, B. Neundorf, Vattenfall Europe Nuclear Energy, Germany, Arne Eriksson, JRC
Petten, The Netherlands. Speaker – B. Neundorf |
| 10.00-10.30 |
Break |
| |
Inspection Qualification I |
Developments in Radiographic Inspection Methods |
RPV and Primary Circuit Inspection I |
| 10.30-10.50 |
Qualification Methodology of Inspection Systems at Spanish
NPP’s: Status and some Examples R. Martínez-Ona: Tecnatom S.A., San
Sebastián de los Reyes, Madrid, Spain |
Tomocar - Tomographical Computer-for the Visualisation and
Sizing of Defects in Circumferential Seams B. Redmer, U. Ewert: Federal Institute
for Material Research and Testing, Berlin, Germany
B. Neundorf: Hamburgische Electricitätswerke AG, Hamburg, Germany |
Implementation of Lightweight Submersed ”Walking” NDE
Manipulators for PWR and BWR M. Wendel: WesDyne TRC AB, Sweden |
| 10.50-11.10 |
The Use of ASME Section XI Appendix VIII for the Evaluation
of a VVER 1000 Reactor Vessel J. P. Lareau, C. Hoffmann: Westinghouse Electric
Company, USA
Q. Ouyang: Jianshu Nuclear Power Company, China |
Development of a Digital Radiographic System for Power Plant
Components S. M. Walker: Electric Power Research Institute, Charlotte, NC, USA |
Inspections of CRDM nozzle penetrations in Paks NPP M.
Dóczi: NPP Paks, Hungary |
| 11.10-11.30 |
Overview of Inspection Qualification Activities in Slovakia M.
Horváth, J. Neupauer: Slovenské elektrárne a.s., Slovak Republic
|
Defect Detectability in EB-welded Copper Disposal Canister
with 9 MeV Accelerator J.Pitkänen, J.Salonen: Posiva, Finland
S.Sandlin: VTT, Finland
U. Ronneteg: Bodycote, Sweden |
Capability of Matrix Phased Array UT for the RV Head
Mockups
R. Katsumata, S. Ninomiya, Y. Matsumoto, Y. Harada: Nuclear Engineering, Ltd.,
Tosabori, Nishi-ku, Osaka, Japan |
| 11.30-11.50 |
Progress in NDT Qualification as a Support to LBB Project for
ANPP in Metsamor L. Horacek: Nuclear Research Institute REZ plc, Czech Republic
G. Sevikyan: ANPP Metsamor, Armenia |
The EN584 standard for the classification of industrial
radiography films and its use in radiographic modelling A. Schumm: EDF R&D
SINETICS, France
U. Zscherpel: BAM, Germany |
Non-Intrusive BWR Reactor Pressure Vessel Inspection Scanner D. Koch: GE-Hitachi Nuclear Energy Americas LLC, Wilmington, NC, USA
A. Manrique, D. Molpeceres: Tecnatom S.A., San Sebastián de los Reyes, Madrid, Spain |
| 11.50-12.10 |
Development of a Qualification program for Reactor Vessel
Upper Head Penetrations J. Spanner : EPRI NDE Center, USA
T. Alley : Duke Energy, USA |
Safety Assessment with High Definition Digital Computed
Radiography S.C.Sood: Computerised Information Technology Limited, Milton Keynes, UK |
In-Service Ultrasonic Examination of BWR MC-Nozzles Using
Qualified Techniques: Experience in Sweden J. R. Gadea, A. Willke, A. García, A.
Manrique: Tecnatom S.A., San Sebastián de los Reyes, Madrid, Spain |
| 12.10-12.30 |
Inspection Qualification - the Next 20 Years R.V.
Booler: Inspection Validation Centre, Serco Assurance, UK |
Content-Based Weld Defect Image Retrieval in Radiographic
Testing N. Nacereddine, A.B. Goumeidane, F. Mekhalfa: Centre de recherche en Soudage
et Contrôle, Algiers, Algeria
L. Hamami: Dpt Electronique, Ecole Nationale Polytechnique. El-Harrach, Algiers,
Algeria
D. Ziou: DMI, Université de Sherbrooke, Sherbrooke, Canada
|
Flaw Detection and Characterization of Pressure Tubes from
CANDU PHWR using Eddy Current Methods R. Grimberg, A. Savin, R. Steigmann: National
Institute of R&D for Technical Physics, Iasi, Romania
M. C. Ruch: COMISION NACIONAL DE ENERGIA ATOMICA (CNEA), Buenos Aires, Argentina
A. Bruma: Faculty of Physics, Al.I Cuza University, Iasi, Romania
L. Udpa, S. S.Udpa: College of Engineering, Michigan State University, USA |
| 12.30-14.00 |
Lunch |
Monday, October 8th (Continued)
| |
Session A |
Session B |
Session C |
Time |
Paper Title |
Paper Title |
Paper Title |
| |
Inspection Qualification II |
Developments in Electromagnetic Inspection Methods I |
RPV and Primary Circuit Inspection II |
| 14.00-14.20 |
Performance Demonstration of IGSCC Depth Sizing in Japan T.
Sasahara, T. Jikimoto: Central Research Institute of Electric Power Industry, Japan |
GMR-Sensor Based Eddy Current Characterization of SCC in
Welded Inconel 182 Plate Samples K. J. Krzywosz: EPRI NDE Center, Charlotte, NC, USA |
Steam Generator Inlet/Outlet Nozzle to Reactor Coolant Piping
Weld Inside Surface Ultrasonic Examination Tooling W. A. Jensen: Point Beach Nuclear
Plant Nuclear Management Company, USA
Steven Todd: IHI Southwest Technologies, USA
J. Fisher, A. Parvin, J. Crane: Southwest Research Institute, USA |
| 14.20-14.40 |
Plant-Specific Applications of Qualified Nozzle UT Procedures
Utilizing EPRI 3D Models - 2002 to 2006 D. E. MacDonald: EPRI NDE Program,
Charlotte, NC, USA |
Eddy Current Array Probe Development for Complex Nuclear
Geometries J-M. Decitre, O. Casula: CEA-LIST, Gif-sur-Yvette, France |
Inspection System for Integrity Determination of the HFR
Outlet Reducers H. Bakker, J. Horstink, J. Janssens, J.-W. Spoelstra: H.-P.
Vierstraete, NRG, The Netherlands |
| 14.40-15.00 |
RSE-M Qualification of an Ultrasonic Inspection System for
the Examination of Thermal Sleeve Attachment Welds on the Surge Line of French PWRs B.
Dikstra, C. McNeil: Doosan Babcock Energy Limited, Renfrew, UK
D. Desprez, B. Molin : Intercontrôle, France
D. Couet : EDF CEIDRE, France |
ET Array Probe Applications with TEDDY+ System B.
Ribes: Tecnatom, S A, San Sebastián de los Reyes, Madrid, Spain |
NDE and DE of PWSCC found in the J-Groove Weld of a
Removed-From-Service Control Rod Drive Mechanism S.E. Cumblidge, S.R. Doctor, G.J.
Schuster, R.V. Harris, S.L. Crawford: Pacific Northwest National Laboratory, USA |
| 15.00-15.20 |
The Validation of an Ultrasonic Phased Array Inspection
Technique for Critical Defect Detection and Sizing C. R. Bird: TWI, Cambridge, UK
R. Turner: BAE Systems Ltd, Barrow in Furness, UK |
A Novel Approach to Enhance the Sizing Ability of AC-Based
Electromagnetic Nondestructive Testing Methods N. Yusa, K. Miya: IIU, Corp.,
Ikenohata, Taito, Tokyo, Japan
L. Janousek: Department of Electromagnetic and Biomedical Engineering, Faculty of
Electrical Engineering, University of Zilina , Zilina, Slovakia |
Core Shroud Inspection Coverage and Inspection Time
Improvements through Phased Array Technique and Manipulator Improvements S.W. Glass,
J.T. Lindberg: AREVA NP |
| 15.20-15.40 |
Break |
| |
Inspection Qualification III |
Developments in Electromagnetic Inspection Methods II |
RPV and Primary Circuit Inspection III |
| 15.40-16.00 |
Utility Aspects of Applicability of Different Flaw Types for
Qualification Test Pieces R. Paussu: Fortum Nuclear Services Ltd, Finland
M. Kemppainen, I. Virkkunen: Trueflaw Ltd., Finland |
Novel Data Evaluation Technique For Magnetic NDT Measurements I.
Mészáros: Budapest University of Technology and Economics, Budapest, Hungary |
Advancements in BWR Shroud Examination Tooling and Multitask
Managing Techniques P. Boone, J. Laureau, B. Schlueter: WesDyne International,
Madison, PA, USA
|
| 16.00-16.20 |
Defects used in Qualification – A Discussion W.L.
Daniels, B.A. McGrath, R.V. Booler: Inspection Validation Centre, Serco Assurance, UK. |
ID Pit Sizing Utilizing Two Variable Regression Curves N.
Muthu: EPRI, Charlotte, NC, USA
F. Hall: Wolf Creek Nuclear Operating Corp. NE Burlington, KS, USA
C. J. Speas: Anatec International, San Clemente, CA, USA |
Development of Remotely Operated Vehicle for Shroud Support
in BWR Plant H. Adachi, Y. Yuguchi, T. Maehara, K. Soma, M. Shimamura, Y. Togasawa:
Toshiba Corporation, Isogo-Ku, Yokohama, Japan |
| 16.20-16.40 |
Importance of Crack Opening in UT Inspection Qualification M.
Kemppainen, I. Virkkunen: Trueflaw Ltd, Finland
T. Packalén, J. Sillanpää: Inspecta Certification, Finland
R. Paussu: Fortum Nuclear Services, Finland |
Improvement of Reliability of Estimation of Fatigue State of
Welded Joints by Non-destructing Testing Based on Magnetic Characteristic of Metal, its
Coercive Force G.Ya. Bezyudko: Special Scientific Developments, Kharkov, Ukraine
S.N. Kovbasenko: Nuclear Research Institute of the National Academy of Sciences, Kiev,
Ukraine
E.V. Muravyev: CAMERTON, Moscow, Russia
B.E. Popov: KRAN, Moscow, Russia
R.N. Solomakha: Special Scientific Engineering, Kharkov, Ukraine |
Development of the In-vessel Piping Inspection System Y.
Yuguchi, T. Hirasawa, K. Murakami, Y. Togasawa, H. Hozumi, I. Kameyama, M. Shimamura:
Toshiba Corporation, Isogo-Ku, Yokohama, Japan |
Tuesday, October 9th
| |
Session A |
Session B |
Session C |
Time |
Paper Title |
Paper Title |
Paper Title |
| |
Structural Integrity and NDE Reliability I |
Development of Visual and Other NDE Methods |
Austenitic and Bimetallic Weld Inspection I |
| 08.30-08.50 |
Current Role of NDT Qualification and RI ISI within
In-service Inspection Related Activities in Czech Republic L. Horacek: Nuclear
Research Institute REZ plc, Czech Republic
P. Kopcil: CEZ, plc Czech Power Generation Company, Czech Republic |
Development of the Super Resolution Imaging System for Visual
Testing Y. Satoh, T. Aikawa, M. Ochiai, H. Adachi, J. Takabayashi: Toshiba
Corporation, Isogo-Ku, Yokohama, Japan |
Optimization and Validation of Phased-Array Ultrasonic
Techniques for Inspection of Clad Piping Dissimilar Materials Welds M. Lozev, P.
Patel, R.Spencer: Edison Welding Institute, Columbus, OH, USA |
| 08.50-09.10 |
ENIQ International Activities on Risk Informed
In-Service-Inspection L. Gandossi, A. Eriksson: JRC, Netherlands
K. Simola: VTT, Finland |
An Assessment of Remote Visual Methods to Detect Cracking in
Reactor Components S. E. Cumblidge, M. T. Anderson, S. R. Doctor, F. A. Simonen:
Pacific Northwest National Laboratory, USA
J. Elliott: Oregon State University, USA |
Ultrasonic Examination of a CVCS Weld B. Chassignole :
EDF R&D, MMC Department, Moret sur Loing, France
E. Abittan: EDF CEIDRE, Saint Denis, France
O. Paris: CEA, Saclay, France |
| 09.10-09.30 |
Risk-Informed Methodology of New ISI-Programme of Loviisa
Unit 1 O. Hietanen, K. Jänkälä, N. Bergroth, R. Paussu, V. Nikula: Fortum Nuclear
Services Ltd, Finland |
Application of Molding VT Technique on Surface Breaking
Defects in Wet Environment M. Popescu-Pfeiffer, B. Wiechers , H. Lenz: Westinghouse
Electric Germany GmbH, Mannheim, Germany |
Inspection of Cracks in Stainless Steel Weld with Matrix
Probe J. Nishida, Y. Asada: Mitsubishi Heavy Industries, Ltd. Kobe Shipyard and
Machinery Works, Japan
S. Kawanami: Mitsubishi Heavy Industries, Ltd. Takasago Research and Development
Center, Japan
M. Takahashi, H.Aogaki ,D. Braconnier : KJTD, Higashiosaka, Osaka, Japan |
| 09.30-09.50 |
Progress in RI ISI Applications for WWER 440 and WWER 1000
Type Piping Systems and Lessons Learnt in Czech Republic and abroad L. Horacek:
Nuclear Research Institute REZ plc, Czech Republic |
New Surface Inspection Technique by Photo Thermal Camera M.
Higashi: Mitsubishi Heavy Industries, Ltd., Takasago Research and Development Center,
Japan
Y. Suda, Y. Asada: Mitsubishi Heavy Industries, Ltd., Kobe Shipyard and Machinery
Works, Japan
M. Piriou: AREVA NP, NDE Technical Center, France |
International Study of NDE Techniques for Inspecting
Nickel-base Alloys G.J. Schuster, S.R. Doctor: Pacific Northwest National Laboratory,
USA
|
| 09.50-10.10 |
Results of the Pilot Study on the Quantitative Modelling of
the ENIQ Methodology for NDT Qualification L. Gandossi: JRC, Netherlands
K. Simola: VTT, Finland
B. Shepherd: Doosan Babcock Energy Limited, Renfrew, UK |
Quantitative Acoustic Emission Non-Destructive Inspection
Method as a Tool for Flaw Revealing, Identifying and Assessing in High Chromium Steels G.
Muravin, B. Muravin, L. Lezvinsky: Margan Physical Diagnostics Ltd., Netanya, Israel
|
An Update on Flaw Tolerance Evaluation Studies on Thermally
Aged Cast Austenitic Stainless Steel Piping T. J. Griesbach, N. G. Cofie, R. O.
McGill: Structural Integrity Associates, USA |
| 10.10-10.30 |
Link between RI-ISI and Inspection Qualification –
Relationship between Defect Detection Rate and Margin of Detection B. Shepherd, S.
Goujon: Doosan Babcock Energy Limited, Renfrew, UK
M. J. Whittle: John Whittle & Associates, UK |
Investigation of the behaviour of super critical water in the
model of 4th generation reactor by combined NDE methods M. Balaskó, L. Horváth,
Á. Horváth, P. Tóth: MTA KFKI Atomic Energy Research Institute, Budapest, Hungary |
Assessment of the Effectiveness of Ultrasonic Inspection of
Austenitic Steel 325 mm Diameter Welds in Reactor Main Assisted Circulation Circuit at
Ignalina NPP, Lithuania J. Saburov, Z. Viliunas, L. Bulochova, A. Arzhayev, K.
Arzhayev, V. Makhanev: Ignalina NPP, Lithuania
|
| 10.30-10.50 |
Application of EPRI RIISI Methodology for In-Service
Inspection of Safety System Pipes at Ukrainian NPPs I.Kadenko: Nondestructive
Examination Training and Certification Facility, Ukraine
O.Kharytonov, O.Kutzenko, G. Zrazhevsky: Taras Shevchenko National University of Kyiv,
Ukraine
|
Combined NDE methods in the inspection of the damaged control
rods M. Balaskó, I. Benkovics, L. Horváth, S. Tözsér: MTA KFKI Atomic Energy
Research Institute, Budapest , Hungary
Z. Kiss, A. Tanács, A. Nagy: University of Szeged, Department of Image Processing and
Computer Graphics, Hungary
E. Sváb: MTA Research Institute for Solid State Physics and Optics, Hungary |
Examination of Reactor Vessel Primary Nozzle Alloy 600
Dissimilar Metal Welds Using SQUID J. Lareau, D.E. Klinvex, K.H. Behanna, J. Mino,
P.M. Minogue, C.S. Wyffels, C.J. Adamonis, S.A.Sabo: WesDyne International, USA
T.A. McAlister: South Carolina Electric and Gas, USA
|
| 10.50-11.10 |
Break |
| |
Structural Integrity and NDE Reliability II |
Developments in Ultrasonic Inspection I |
Austenitic and Bimetallic Weld Inspection II |
| 11.10-11.30 |
Use of Monte-Carlo Methods to Derive Quantitative Probability
of Defect Detection Data A.E. Walker, T. Cool, A. Stevens: Rolls-Royce, Derby, UK |
An Array-Type Electromagnetic Acoustic Transducer for a Long
Pipe Inspection H.-K. Jung, S. Kim, Y.-M. Cheong: Korea Atomic Energy Research
Institute (KAERI), Daejon, Korea |
A Comparison of Ultrasonic Flaw Responses as Observed Through
Austenitic Stainless Steel Piping Welds M.T. Anderson, S.L. Crawford, S.E.
Cumblidge, A.A. Diaz, S.R. Doctor: Pacific Northwest National Laboratory, USA |
| 11.30-11.50 |
Hidden Markov Chain Model for Lifetime Prediction of Pressure
Tubes in PHWR Nuclear Power Plant R. Grimberg, A. Savin, R. Steigmann: National
Institute of R&D for Technical Physics, Iasi, Romania
M. C. Ruch: Comision Nacional de Energia Atomica (CNEA), Buenos Aires, Argentina
A. Bruma: Faculty of Physics, Al.I Cuza University, Iasi, Romania
L. Udpa, S. S. Udpa: College of Engineering, Michigan State University, USA |
UT Response of Artificial Cracks – Effect of Crack Opening
on Various Techniques T. Packalén, J. Sillanpää: Inspecta Certification, Finland
R. Paussu: Fortum Nuclear Services, Finland
M. Kemppainen, I. Virkkunen: Trueflaw Ltd, Finland |
Development of Crack Sizing Method by
Ultrasonic Testing on Weld Metal of Nickel Based Alloy M. Miki, N. Kono, Y.
Nonaka, K. Ehara: Hitachi, Ltd., Japan |
| 11.50-12.10 |
POD Evaluation of NDE Techniques for Canister-Components for
Risk Assessment of Nuclear Waste Encapsulation C. Müller, M. Pavlovic, K.
Takahashi, U. Ewert, M. Scharmach , G Brekow, R. Boehm: BAM Berlin, Germany
U. Ronneteg,G. Emilsson: SKB Sweden |
Influence Of Crack Networks On The Ultrasonic Inspection Of A
Propagated Defect. L. Doudet, B. Chassignole, O. Dupond : EDF R&D, MMC
Department, Moret sur Loing, France
E. Abittan: EDF CEIDRE, Saint Denis, France |
Low Frequency Phased Array Methods for Crack Detection in
Cast Austenitic Piping Components M.T. Anderson, S.L. Crawford, S.E. Cumblidge, A.A.
Diaz, S.R. Doctor: Pacific Northwest National Laboratory, Richland, Washington USA
|
| 12.10-12.30 |
Crack Propagation Sensitivity Index Handbook L. Tóth,
Sz. Szávai: Bay Zoltan Institute for Logistics and Production Systems, Hungary
N. Szűcs: University of Miskolc, Hungary |
Improvement of Reliability, Efficiency and Reduction of Cost
of Diagnostics of Nuclear Power Stations Equipment Using Ultrasonic
Electromagneto-acoustic Thickness Measurement Technique E.V. Muravyev: CAMERTON,
Moscow, Russia
G.Ya. Bezlyudko, Ye.V. Dolbnya, R.N. Solomakha, S.M. Udovenko: Special Scientific
Engineering, Kharkov, Ukraine |
Detectability and Sizing Capability of UT to SCC in Nickel
Based Alloy Welded Joint K. Kono, H. Miharada, M. Otaka: Safety Standard Division
Japan Nuclear Energy Safety Organization (JNES), Toranomon, Minato-ku, Tokyo, JAPAN |
| 12.30-14.00 |
Lunch |
Tuesday, October 9th (Continued)
| |
Session A |
Session B |
Session C |
Time |
Paper Title |
Paper Title |
Paper Title |
| |
Structural Integrity and NDE Reliability III |
Developments in Ultrasonic Inspection II |
Austenitic and Bi-Metallic Weld Inspection III |
| 14.00-14.20 |
PANI 3 - Experimental Implementation and Ultrasonic
Performance Results
H. Bainbridge: Health and Safety Executive, UK
B. McGrath, J Wheeler: Inspection Validation Centre, Serco Assurance, UK.
A. Bell: Division of Psychology and Social Change, Manchester Metropolitan University,
UK |
SAFT Performance in Ultrasonic Inspection of Coarse Grained
Metals T. Stepinski, M. Engholm: Signals and Systems, Uppsala University, Uppsala,
Sweden |
Validation Test of Ultrasonic Testing for PWR Pressurizer’s
Dissimilar Metal Weld Joint H. Murakami, Y. Asada: Mitsubishi Heavy Industries Ltd.,
Kobe Shipyard and Machinery Works, Japan
T. Kimura, M. Nakai: Mitsubishi Heavy Industries, Ltd., Takasago Research and
Development Center, Japan
T. Sasahara, T. Jikimoto: Central Research institute of Electric Power industry, Japan |
| 14.20-14.40 |
Increasing Results Reliability for SG Tubes of NPPs with VVER
based on Experimental Assessment of Human Factor I.Kadenko, N.Sakhno, R.Yermolenko:
Nondestructive Examination Training and Certification Facility, Ukraine |
Magnetostrictive Sensor Guided-Wave Technology for Long-Term
Structural Health Monitoring of Nuclear Components H. Kwun, S. Y. Kim, G. M. Light::
Southwest Research Institute, San Antonio, Texas, USA
|
Dissimilar Metal Weld Inspection of PZR Nozzles in Korea and
Round Robin Test of DMW for PINC using Phased Array UT Technique E. Doh, T.-S. Lee,
C.-H. Song: Korea Plant Service & Engineering Company, Kyungki, Korea |
| 14.40-15.00 |
Accounting for Individual Variation in Manual Ultrasonic NDT
Inspection Performance A. Bell, G. A. Munley, K. Rowley: Division of Psychology and
Social Change, Manchester Metropolitan University, UK
B. McGrath: Inspection Validation Centre, Serco Assurance, UK.
H. Bainbridge: Health and Safety Executive, UK |
The Effect of Grain Size on the Defect Detectability in
Copper Components in Ultrasonic Testing J.Pitkänen: Posiva, Finland
W.Arnold, S.Hirsekorn: IzfP, Germany
|
TRL Inspection of a Nuclear Bimetallic Weld C.
Nageswaran, C. Bird: TWI, Cambridge, UK |
| 15.00-15.20 |
Development of a Root Mean Squared Error Flaw Sizing
Criterion D. E. MacDonald, EPRI, Charlotte, NC, USA |
Development of Guideline and Supporting Computer Program to
Estimate Uncertainty in Interpreted Size of Cracks from Non-Destructive Tests B.
Hildenwall, A. Brunn: SQC Qualification Centre, Sweden |
Qualification of Digital Radiography for Detection of Stress
Corrosion Cracking in Dissimilar Metal Welds using an ASME Section V Approach. T.
Spelde: Exelon Corporation, USA
E.K. Kietzman, W.L. Daniels, I. Atkinson: KANDE, USA
|
| 15.20-15.40 |
The Way We Were M. L. Turnbow : Tennessee Valley
Authority, USA |
Complementarily between Creeping Wave Single Element
Transducer, 1D Phased Array, 2D Phased Array for Stainless Pipe Welding Crack Inspection H.
Kawashima, K. Ooi: Todenkougyou, Kanagawa Kawasaki, Japan
M. Takahashi, D. Braconnier: KJTD, Higashiosaka, Osaka, Japan |
|
| 15.40-16.00 |
Break |
| |
Material Properties Measurement |
Developments in Ultrasonic Phased Array Inspection I |
Steam Generator Tube Inspection |
| 16.00-16.20 |
Characterization of Welded Inconel 182 Plate Samples for
Internal Stress by Neutron Diffraction C. R. Hubbard: Oak Ridge National Laboratory,
Oak Ridge, TN, USA
K. J. Krzywosz: EPRI NDE Center, Charlotte, NC, USA |
On the Use of Advanced UT Phased Array Methodology and
Equipment G. Maes, D. Richard: Zetec, Québec , Canada |
Human Factor Estimation for ET Results Reliability of SG
Tubes of NPPs with VVER I.Kadenko, N.Sakhno: Nondestructive Examination Training and
Certification Facility, Ukraine
I.Sergeev: International Nuclear Safety Center of Ukraine |
| 16.20-16.40 |
Inspection of Steel Degradation by Magnetic Adaptive Testing G.
Vértesy: Research Institute for Technical Physics and Materials Science, Hungarian
Academy of Sciences, Budapest, Hungary
I. Tomáš: Institute of Physics, Academy of Sciences of the Czech Republic, Praha,
Czech Republic
S. Kobayashi: Non Destructive Evaluation and Science Research Center,Faculty of
Engineering, Iwate University, Japan
|
Contribution to Crack Sizing by Phased Array Ultrasonic
Techniques. Part 2: Comparison with Optical, Magnetic Particles, Fracture Mechanics and
Metallography for Last Significant Crack Tip
P. Ciorau: Ontario Power Generation, Canada |
Development of an Eddy Current Probe for Detecting Outside
Circumferential Cracks near an Expansion of Heat Exchanger Tubes S. Narishige, A.
Nishimizu, M. Koike, Y. Abe, Y. Narumi: Hitachi Ltd., Japan |
| 16.40-17.00 |
Ultrasonic Characterisation of Welds Using Velocity,
Attenuation and Hardness Measurements Of Layers F. Boukazouha, S. Djili, R. Halimi:
Scientific Center of Research on Welding and Non Destructive Testing
Characterisation and Instrumentation Laboratory, Algiers, Algeria |
Adaptive Focus UT Technique for Complex Geometry T.
Kimura, M. Kurokawa, S. Kawanami: Mitsubishi Heavy Industries, Ltd. Takasago Research and
Development Center, Japan
H. Yonemura, Y. Asada: Mitsubishi Heavy Industries, Ltd. Kobe Shipyard and Machinery
Works, Japan |
Steam Generator Tube Degradation and Integrity Program in
Korea S.-C. Kang, M.-H. Song, H.-S. Shin: Korea Institute of Nuclear Safety,
Daejeon, Korea |
| 17.00-17.20 |
|
LPA UT – Recent Experience and New
Developments/Qualifications J. J. Hayden, A. Porter,
M. Lashley: Structural Integrity Associates, USA |
Development of a Multi-technique System (ET, UT, Plug) for
Steam Generators Inspection of Kola NPP P. Pineiro, T. Batuecas: Tecnatom S.A., San
Sebastián de los Reyes, Madrid, Spain |
| 17.20-17.40 |
|
Practical Application of Phased Array Techniques in Field
Inspection M. Borrás: Tecnatom S.A., San Sebastián de los Reyes, Madrid, Spain |
Analytical Determination of Flaw Critical Dimensions in Steam
Generator Tube I. Kadenko, R. Yermolenko, N. Sakhno: Nondestructive Examination
Training and Certification Facility, Ukraine
O. Kharytonov, O. Kutsenko: Taras Shevchenko National University of Kyiv, Ukraine |
Wednesday, October 10th
| |
Session A |
Session B |
Session C |
Time |
Paper Title |
Paper Title |
Paper Title |
| |
Modelling I |
Developments in Ultrasonic Phased Array Inspection II |
Other Major Component Inspection I |
| 08.30-08.50 |
Application of WWER 440 and WWER 1000 Type On-line Library of
UT Examination and CIVA Simulation Responses in Czech Republic L. Horacek, P. Vlcek,
M. Zelenka, I. Buldra, P. Mares: Nuclear Research Institute REZ plc, Czech Republic |
Non-Destructive Inspection of Components with Irregular
Surfaces using a Conformable Ultrasonic Phased Array R. Long, J. Russell, P. Cawley:
Imperial College, London, UK
N. Habgood: Rolls-Royce Marine, Derby, UK |
Development of Inspection Technology for Inside Lining of NPP
ESW Pipe C.K.Kim, C.H.Park, J.M.Lee, J.G.Choi: KAITEC Inc., Daejeon, Korea |
| 08.50-09.10 |
Methodology for Modelling Ultrasonic Inspection of an
Austenitic Stainless Steel Weld O. Dupond, B. Chassignole, L. Doudet : EDF R&D,
MMC Department, Moret sur Loing, France
C. Birac: EDF CEIDRE, Saint Denis, France |
Phased Array Ultrasonic Technology Contribution to
Engineering Critical Assessment (ECA) of Economizer Piping Welds P. Ciorau: Ontario
Power Generation, Pickering, Canada
D.Gray: Ontario Power Generation, Nanticoke, Canada
W. Daks: CAD WIRE, Markham, Canada |
Application of Guided Waves Technology for Screening of
SeaCure Tubing N. Muthu: EPRI, Charlotte, NC, USA |
| 09.10-09.30 |
Experimental Validation of the UTDefect Simulation Software H.
Wirdelius: SCNDT/Chalmers University Of Technology, Göteborg, Sweden |
Advanced Matrix Phased Arrays Settings for Complex Components
Inspection: Simulation and Applications S. Mahaut, P. Dubois, S. Chatillon : CEA,
LIST, Service simulation et systeme pour la surveillance et le CND, Gif-sur-Yvette, France
L. Le Ber, O. Roy : M2M, Les Ulis, France |
Fuel Rod Inspection System, SICOM-ROD J. Guerra:
Tecnatom S.A., San Sebastián de los Reyes, Madrid, Spain |
| 09.30-09.50 |
Simulation Tools for TOFD Inspection in CIVA Software S.
Chaffai , M. Darmon, S. Mahaut : Commissariat a l’Energie Atomique, CEA/DRT/LIST,
Gif-sur-Yvette, France
R. Menand : EDF, CEIDRE, Saint Denis Cedex 1, France |
Weld Overlay Examination Using Ultrasonic Phased Array
Technology M. Dennis, C. Latiolais, B. Thigpen: EPRI, Charlotte, NC, USA |
NDT of Ductile Cast Iron from Nuclear Waste Storage Canisters
T. Seldis,
EC-JRC-Institute for Energy, The Netherlands
F. Lofaj, Institute of Materials Research of the Slovak Academy of
Science, Slovak Republic |
| 09.50-10.10 |
Flaw Detection and Thin Materials Thickness Measurement using
Time Frequency and High Resolution Algorithms R. Drai, F. Megherbi, M. Khelil :
Centre de Recherche Scientifique et Technique en Soudage et Contrôle (CSC), Algiers,
Algeria |
Correlation of Phased Array Inspection and Fatigue
Performance of FSW Joints D. Caravaca, C. Bird: TWI, Cambridge, UK |
NDE for Preventing Radioactive Nuclides Release into
Groundwater N. Muthu: EPRI, Charlotte, NC, USA |
| 10.10-10.30 |
Break |
| |
Modelling II |
Developments in Ultrasonic Phased Array Inspection III |
Other Major Component Inspection II |
| 10.30-10.50 |
3D Computer Model for Tapered Dissimilar Metal Weld
Examination D. E. MacDonald, M. A. Dennis: EPRI NDE Program, Charlotte, NC, USA |
Thick Part Inspection using Volume Focusing Technique and
Large Aperture Phased Array B.-S. Yoon, H.-J. Lee: KEPRI, Nuclear Power Laboratory,
Daejeon, Korea
J. Murai, T. Murakami, D. Braconnier : KJTD., Higashiosaka, Osaka, Japan |
Baffle Former Bolts Inspection and replacement at Loviisa NPP J.
J. Regidor, Tecnatom, S.A.
A. Ballesteros, F. Cazorla: Tecnatom, S.A.
K. Heid : Westinghouse Electric Germany
|
| 10.50-11.10 |
Modelling of Ultrasonic Testing for Inspection of Nodular
Cast Iron Insert J.Pitkänen: Posiva, Finland
M.Sarkimo: VTT, Finland
S.Lonne: CEA, France |
2D Arrays and Volume Focusing Combined Inspection Technique M.
Takeko, M. Junichi, D. Braconnier:
KJTD, Higashiosaka, Osaka, Japan |
Phased Arrays for Detecting Cracking in Bolts M. Moles:
Olympus NDT, Toronto, Ontario, Canada
R. Ginzel: Eclipse Scientific Products, Kitchener-Waterloo, Ontario |
| 11.10-11.30 |
Numerical Modeling of Ferromagnetic Tube Inspection via an
Integral Equation Approach A. Skarlatos, G. Pichenot: CEA/DRT/LIST/DETECS/SYSSC/LSM,
France
D. Lesselier, M. Lambert, and B. Duchene: Département de Recherche en
Electromagnétisme – Laboratoire des Signaux et Systemes (CNRS – Supélec – Univ
Paris-Sud), France |
Piping Inspection using a 3-D Smart Flexible Phased Array G.
Toullelan, A. Nadim, O. Casula: Commissariat a l’Energie Atomique, DRT/LIST, CEA
Saclay, France
E. Abittan : Electricité de France, EDF/Ceidre, Saint-Denis, France |
Improved Inspection Capability of Preventative Weld Overlays J.
Spanner, C. Latiolais: EPRI, Charlotte, NC, USA |
| 11.30-11.50 |
Development of Eddy Current Simulation Features within CIVA
for the Analysis of Steam Generator Tubing Inspection Safety Issues T. Sollier, G.
Cattiaux : IRSN, France
G. Pichenot, C. Reboud : CEA, LIST, France |
Detection and Critical Sizing of Weld Defects using a
Validated Ultrasonic Phased Array Procedure C. R. Bird: TWI, Cambridge, UK
R. Turner: BAE Systems Ltd, Barrow in Furness, UK |
Remote Visual Inspection of Steam Turbines with Turbine Cover
in Place G. Burkhardt, A. Parvin, J. Fisher : Southwest Research Institute, USA |
| 11.50-12.10 |
Verification of the Simulation Code for Analyzing UT Wave
Propagation Using Photoelastic Visualization System I. Komura, T. Furukawa: Japan
Power Engineering and Inspection Corporation, Japan |
Extended Volume Coverage of Overlaid Weld Repairs Using
Phased Array Technologies P. Riccardella, J. J. Hayden,
A. Porter: Structural Integrity Associates, USA |
Quantitative Defect Sizing on Components with Different Wall
Thicknesses Using UT-SAFT G. Brekow, D. Brackrock, R. Boehm, H. Eggers:
BAM, Berlin, Germany |
| 12.10 -12.30 |
|
Detachable Active Array Head (DAAH): A Proposed Solution to
Help the Proliferation of Phased Array Manual UT
W. Mainguy: HARFANG Microtechniques inc., Québec City, Canada |
Eddy Current Inspection Robotic System For Piping G. L.
Burkhardt, A. J. Parvin, R. H. Peterson, R. F. Tennis, T. H. Goyen: Southwest Research
Institute, San Antonio, Texas, USA |
12.30 |
Conference Ends |
| 12.30-14.00 |
Lunch |
|
top of page
